FM repeaters and simplex, with the directory built in.
On a supported radio, the app runs FM through the radio's own RF module: frequencies, offsets and tones from your memories or the built-in repeater directory, with no codeplug and no cable.
FM in Unified Radios
FM is the analog voice mode for repeaters and simplex, and a direct way to reach the operators near you. In Unified Radios, FM goes out over the air through the RF module of a supported radio, and the app programs the module for each channel, so you never build or load a codeplug.
On an Android phone or tablet, the app gives you the network modes: DMR, D-STAR, System Fusion, P25 and M17, all free.
Every FM setting, set for you.
- Frequency and offset, CTCSS and DCS tones, bandwidth, power and squelch, per channel.
- Repeaters and simplex from your memories, with FM, DMR and network channels in one zone.
- The radio face shows the receive frequency, tone, squelch and signal.
- Side-key PTT on supported hardware, and Bluetooth speaker-mic or headset buttons.
Local repeaters, nearest first.
Open Repeaters and see the FM and DMR repeaters around you, with VHF and UHF filters and a search by callsign, city or talkgroup. Each entry has its frequency, offset and tone. Tap Tune to go there, or Save to Memory to keep it. Browsing is free.
Members with a subscription and a verified callsign can add FM repeaters and correct entries. Every change is logged. You can also browse the public repeater directory on the web.
Free, and what a subscription adds
Free: FM through a supported radio's RF module on any paired device, and the repeater directory: browse, search and tune.
Subscription: memories synced with the User Portal both ways, repeater edits, satellite passes with one-tap tuning of FM satellites, Propagation, the live call log and Community. Every new account can try them free for 14 days. Compare plans.
FM questions.
Can I use FM on my phone?
FM goes out over the air through the RF module of a supported radio. On an Android phone or tablet, the app gives you the network modes: DMR, D-STAR, System Fusion, P25 and M17.
Is FM free in the app?
Yes. FM through a supported radio's RF module comes with any paired device, and browsing the repeater directory is free.
How do I find local repeaters?
Open Repeaters in the app. FM and DMR repeaters near you are listed nearest first, with VHF and UHF filters. Tap Tune to go there, or Save to Memory to keep it.
Which tones does the app support?
CTCSS and DCS tones, set per channel along with the offset, bandwidth, power and squelch.
Can I work FM satellites?
Yes, with a subscription. The Satellites screen shows passes and Doppler-corrected frequencies, and on a supported radio Tune sets the radio for an FM satellite.
Also on the radio's RF module.
DMR
BrandMeister, TGIF, ADN and seven more networks, a TS1 or TS2 choice on DMR+ and DVSPh, and DMR over the air.
Bring your radio to life.
Create a free account and pair your radio. FM and the repeater directory are free.